HF-90M Technical Product Specifications
General
|
Frequency range: |
2-30MHz |
|
Modes of operation: |
USB, LSB (J3E), CW (optional), Hopping (optional), AM (RX only), FSK |
|
Number of channels: |
255 |
|
Channel resolution: |
100Hz |
|
Supply voltage: |
12-24V DC (nominal) |
|
Power consumption: |
2A-10A (subject to pre-set power output) 310mA |
|
Frequency stability: |
± 1ppm (00C-400C) |
Antenna impedance: |
50 OHM |
|
Antenna connector: |
BNC |
|
Handsets: |
Speaker microphone, DTMF microphone & telephone handset |
Selcall system: |
Based on CCIR 493-4 (Australian Standard) |
Programming: |
Via front panel & DTMF mic/handset or IBM PC 4800, 8 1, N |
|
BITE: |
Micro, Rx, Tx tests |
Environmental
Operating temperature: |
-30°C to 60°C |
Storage temperature: |
-30°C to 80°C |
Humidity: |
95% non-condensing |
Environmental rating: |
Mil-Std 810F Immersion, Vibration, Drop, Temperature. |
Physical Characteristics
Dimensions: |
112mm(W) x 47mm(H) x 220mm(D) |
Weight: |
-30°C to 80°C |
Construction: |
All metal extruded sleeve with front panel and heatsink |
Finish: |
Black anodised aluminium |
Transmitter
Power output: |
50 Watt PEP (Tactical Frequencies) or Low Power setting 10Watts |
Duty cycle: |
Normal speech or data (with fan option) |
Unwanted sideband: |
Better than -45dB |
Carrier suppression: |
Better than -45dB |
Harmonic suppression: |
Better than -40dB |
Spurious emissions: |
Better than -40dB |
Noise suppression: |
Better than -35dB |
Distortion: |
Less than 5% @ 70% PEP |
Audio response: |
270Hz - 2800Hz |
Microphone impedance: |
Electret insert |
Tune: |
20W radiated @ +1000Hz |
Load Protection: |
ALC |
Receiver
Sensitivity: |
0.25 µV for 10dB S+N/N |
Selectivity: |
2.3kHz @ -6dB |
Image rejection: |
Better than -50dB |
Intermodulation: |
Better than -70dB |
3rd order intercept: |
+18dBm (GaAsFET mixer) |
Blocking: |
Better than -70dB |
Spurious response: |
Better than -60dB |
IF rejection: |
Better than -60dB |
Intermediate freq's: |
3.16MHz, 455kHz |
AGC: |
Less than 3dB from 3 µV-1V |
Clarifier range: |
± 250Hz |
Audio response: |
270Hz-2800Hz |
Audio output: |
2Watt |
Audio load impedance: |
8 OHM |
Audio distortion: |
Less than 5% @ 1W |
Type Approvals & Identifiers
FCC Identifier: |
RK2HF90 |
FCC Rule: |
Part 90 |
FCC Emission Designator: |
2K50J3E |
Industry Canada Specification: |
RSS125 |
Industry Canada Emission Designator: |
2K50J3E |
Industry Canada Certification Number: |
4746A-HF-90 |
NATO Codification System (NCAGE): |
Z01Q3 |
Q-MAC Electronics Pty Ltd reserves the right to alter any of the specifications contained in this document without notice.